Showing posts with label twilight zone. Show all posts
Showing posts with label twilight zone. Show all posts

Tuesday, July 19, 2011

I'm talking Tina, and here is your extra ball

One of the legs of my TZ wasn't fixed like it should - the screws were worn out and had bolts at the inside. Still there was a little bit of room - which probably caused my tilt during litz a few days ago.
Bought last week some leg plates and new bolts so tonight I installed them.
Noticed too the front wasn't completely level (one leg touched the ground a little bit earlier than the other when you put the game down, and the cabinet twisted a bit).
The game also wasn't setup very steep, leg levellers were out quite a bit.

I just adjusted the one leg so both front legs are level, nothing more. It was less than half a cm (probably 3mm) out, only took me 2 or 3 turns of the leveller.

The game suddenly plays a lot better. It's less agressive (less drains to the outlanes). I also put it to default 5-ball settings (which enabled extra balls).
Played two games, one of 250 million and one of 595 million. Not bad.
I hope the frustrating less than 100 million games are gone now.

Sunday, July 17, 2011

LITZ baby !

Played TZ again tonight. Had a few bad games - although bad - same as usualy, drain, drain, good ball, drain, make mistake and drain I finally got a bit more into it.

Some drains you can't do anything about, the ball leaves the popbumpers in the wrong direction and is soo fast it drains before you notice.
Peter of gamebunker also blogged about my TZ and how it's almost impossible to play.

Half of the drains are my own mistake. TZ is not a forgiving game. Every shot must count and be where you want it to be. Miss a shot, the ball will bounce somewhere and drain. Let the ball bounce around out of control, and it'll find its way to the outlanes. So you need ball controll all the time and aim and not miss.

Finally I got a good game ! Lit all door panels and was able to start Lost in the Zone (LITZ). Unfortunately I drained during this multiball - have to adjust the tilt because it just is too sensitive. But I finally put my initials in - grand champion with 909 million. I'm happy!

Monday, July 4, 2011

Started to play my Twilight Zone again

Since last week I have room again in my gameroom ! Before I had an extra machine in for a restoration.
That Medieval Madness is now gone, and now I finally could set up the Little Pro mini golf game. The Little Pro was disassembled since last year in my gameroom, it was in the middle path of the gameroom, in front of my Bram Stokers Dracula and Twilight Zone pinball machines.
So yes, I couldn't play any of these games for almost a year.

To be honest, I even think it was about 5 years since I played Twilight Zone.
OK, I may have played like two to ten games a year on it.. not more.. but that was not really playing, really trying to get a highscore, enjoying the game.. it was more to check if the machine still worked.
A few years ago we even had decided to sell our Twilight Zone as we didn't play it anymore.. but in the end played a few games on it again and decided to keep it anyway.. as it's in such good condition, it would be nearly impossible to find one again should we miss it.. but not that we really play it often.

Since three days now I'm again addicted to Twilight Zone. I really want to set a high score and enter my initials.
That's the goal I've set to myself. The machine has reset to its default settings and high scores, so about 600 million is needed.
Not too high.. should be a possibility for me you'd think ?

First put my electronic level on the playfield, the game was tilted almost 1 degree to the right. No wonder the game played weird. Now it's level. But I think I still need to adjust the playfield tilt and make it either more or less steep.

Like it is now set up, the game is just brutal. I've always hated The Addams Family because the magnets can drain the ball so quickly you can't do anything at all anymore.. but my Twilight Zone is even more a drain monster !

I've had more drains the last days than you can imagine and had more than one game that went like this:
- ball 1: skill shot, rocket kicker, popbumpers, left outlane.
- ball 2: skill shot, rocket kicker, popbumpers, right outlane.
- ball 3: skill shot, rocket kicker, popbumpers, sdtm.
aaaaaaaaaaaaaaaaaaaaaaaaaargh
game over without the pinball touching the flippers at all.
Other times: skill shot missed - slotmachine kickout - want to catch it on the right flipper and sometimes it bounces up and goes straight into the right outlane. Why ???

I've had dozens of games where at the start off ball 3 I had less than 10 million points (which is what you can earn with one successful skill shot).
Setting a high score seems an impossible task :-(
I did have a few good games - about 5 times I got between 500 and 550 millions. So almost there.. just have to be a really good game with every ball and I'll get there, I'm sure.

It probably also doesn't help that it's been about 10 years since I shopped the game.
While it is still pretty clean (as it's hardly been played), the rubbers are dead. The red flipper rubbers should be bouncy, but they are not.
I've had ball drains whilest trying to pass the ball from one flipper onto the other, because it didn't bounce hard enough off the flipper tip.
So next on the list is to put fresh rubber on this machine and see how much of a difference that makes.

It probably also doesn't help I'm still recovering from pneumonia. My reflexes are too slow, half of the time I see the bal drain and think 'maybe I should've tried to nudge the machine to rescue that pinball'.

But no more excuses. I should be honest: I'm bad at playing pinball.
Don't get me wrong - I love pinball machines. I love to play them, I love to work on the machines, but I'm just not a good player.
I'm just too bad. I haven't played in the belgian pinball championship for years as I'm not well enough so just don't bother (my goal usually is to be in the top half, but in reality I'm somewhere 2/3rd down the list). The competition is held in january, and I only play often in my gameroom during summer. As from october it gets too cold and I almost don't play anymore. So in january I've totally forgotten how to play pinball and do even more stupid mistakes that frustrate me because I know I should do better but it's been too long since I played.

It's not that I'm really bad a bad player - on a game that fits me I can get high results and get a top 5 score.
The problem is if a game doesn't fit me. I'm not good at nudging, trying to save and keep the ball in the game at all cost, .. then I drain with very low points, which gets my ranking down quickly.. and to do well on competitions you have to average well on any game, and do your best with every ball.

This weekend also was the TIF: Italian pinball championship. The previous two years we visited it, but not this year.
Two years ago we included it with the start of our holidays, last year we even drove especially over there for a weekend.
Not this year. It's just not a good weekend (first weekend of july is the start of the summer holidays, so everyone is driving to the south of Europe with large traffic jams as a result. Last years drive was too exhausting, and this year it would have taken many hours more.. this was not worth it..
I feel sad about it as I loved to meet my Italian friends again, I love to meet pinheads, I love to play all those unknown games I've never seen before..

Maybe one day I'll practice more playing pinball and become a better competition player.. but I've been telling this to myself the last years and I seem to play less and less. I'll just forget about playing championships at all and just concentrate on repairing and restoring these great machines..

Friday, May 27, 2011

Cheap pinballs are still available.. sometimes

Good pinball deals still happen.. but become more and more rare.

Checked out a Twilight Zone pinball machine that someone had bought in a local auction house.
At these auctions usually furniture is sold, pinball machines almost never show up.
The owner was lucky to be there at the right time, and got it for a very good price: 300 euro (about $450).
That's a steal..

The game is in reasonably good condition.
Service buttons were gummed up. Cleaned them and they started to register again.
Boards are exceptionally clean, looking almost brand new. No battery damage at all.
I get the impression this game was not on location for a long time, or it was a very clean location (not a bar where people smoke), as the inside was very clean.

Worst thing was that the mini-playfield was faded, above the magnets are red circles and letters, one was still bright red and the other had faded to almost white.

Main playfield looked good, no wear.
The game had some usual issues you encounter with TZ: slot machine plastic broken, target bent back.

Clock has a broken 12o'clock opto. Clock face was white with gold-colored signs.
No 3rd magnet or special signs on the mini playfield. 2 posts under the popbumper were installed.
This means the game is probably a very early production game. It was still on L-2 version roms.

All coils worked, except for 2 that had a broken wire.
Biggest problem was in the switch matrix, 2 rows are shorted to ground. Traced the problem back to the opto driver board under the playfield. The LM339 ic's on this board need to be replaced.

Sometimes I hear about people finding games for a very low price.. it's been a few years now, but this shows you these finds can still happen.

Wednesday, July 23, 2008

Twilight Zone clock repaired

Last week I finally repaired the clock of my Twilight Zone pinball machine.
Nothing special you say ? Well it is for me !

Believe it or not but I have this game for 7 years now.
Bought it with a broken clock.. shopped it many years ago, even took pictures on how to disassemble the clock.. but at that time I didn't have the correct optos.

Later I ordered the correct optocouplers, but didn't install them as I had work on other games.. just threw the optos in the coin box of TZ and forget about them.
I even found the invoice - paid 600bfr (= 15 euro, 20 us$) for 2 optos at the distributor in Brussels).

Now finally I decided to work on that game. Installed the optos I had, they didn't work - turns out these were for the minute hands of the clock, and the optos for the hours are of a different type.

Desoldered the optos again (woosh, there's $20 down the drain as I had cut the legs already short so those desoldered optos can't be reused for the minutes-board)

I remembered reading on rgp somthing about installing optos backwards to have it work. So I tried another type of opto, didn't solder it yet, just held it in place and connected the board and went into the clock test mode.
Tried it, and yes, when I inserted the opto backwards in the pcb it worked. Nice !

Soldered the optos back in.. assembled the clock, but didn't notice the orientation and put in the board upside down in the clock housing, so the connectors didn't match. Aargh. It really was time to go to bed.. but I wanted to finish it.
Disassembled the clock again.. oops.. the small c-clip that holds the minute hand of the clock fell onto the ground. Aaaaargh.. I really should be sleeping already..

As we have a stonecarpet floor, you can imagine retrieving a small metal c-clip is an impossible task.
It's not the first time I drop a screw or other metal piece, I have a big magnet to sweep over the floor.. a few minutes later I had found it.

Assembled the clock again, and tested it.
The good news was that the repaired optos worked, bad news was that another one was registering all the time because of the vibration of the motor.
Aaaargh.

Time to go to bed.

Next day I disassembled the clock again (and didn't lose any c-clips this time :)
re-soldered pins that make the connection between the two boards, assembled the clock again for the dozenth time, and finally, my Twilight Zone pinball machine works like it should ! No more credit dot !

Wednesday, April 11, 2007

Whirlwind !

This weekend I acquired a Williams Whirlwind pinball machine !

I'm sooo happy ! I got a good deal on it and it's in very good condition.
I had a Whirlwind a few years ago (in 2004) and loved the game..
but as I then also had an Addams Family and a borrowed Monopolyin my gameroom, it was just too much..
I love Pat Lawlor games (also have Twilight Zone, Funhouse and Safe Cracker) but WW, TAF and Monopoly just have a too similar playfield layout.
Monopoly and WW even 'felt' the same, if you could make the shots on one you could make it blindfold on the other game too.
So therefor at that time I sold WW as I needed the room and one game had to go.

Unfortunately the borrowed Monopoly went away after a few months and I sold the TAF too as the playfield was too bad.. I did have a better playfield for it but didn't have time to swap and restore the game.. and TAF just doesn't do it for me. I don't know why but I don't really love that game. But a very good friend of mine loves it, so I sold it to him for what I had into it..
But I love Whirlwind, that was one of the only games I have sold in the past that I really missed..
Welcome home Whirlwind.